Related provisions for BIPRU 7.9.6

1 - 5 of 5 items.
Results filter

Search Term(s)

Filter by Modules

Filter by Documents

Filter by Keywords

Effective Period

Similar To

To access the FCA Handbook Archive choose a date between 1 January 2001 and 31 December 2004 (From field only).

BIPRU 7.9.1GRP
A firm is required under GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to calculate its market risk capital requirement using the rules in BIPRU 7. However, the FSA may at the firm's request modify GENPRU 2.1.52 R to allow the firm to calculate all or part of the PRR for the positions covered by that model by using a CAD 1 model (for options risk aggregation and/or interest rate pre-processing) or a VaR model (value at risk model) instead. BIPRU 7.10 (Use
BIPRU 7.9.2GRP
The purpose of BIPRU 7.9 is to provide guidance on the FSA's policy for granting CAD 1 model waivers under section 148 of the Act (Modification or waiver of rules). The policy recognises that CAD 1 models may vary across firms but, as a minimum, the FSA will need to be satisfied:(1) about the quality of the internal controls and risk management relating to the model (see BIPRU 7.9.19G - BIPRU 7.9.23G for further details);(2) about the quality of the model standards; and(3) that
BIPRU 7.9.3GRP
BIPRU 7.9 also explains how the output from the CAD 1 model is fed into the market risk capital requirement calculation.
BIPRU 7.9.7GRP

Table: Types of CAD 1 model

This table belongs to BIPRU 7.9.6G

Options risk aggregation models

Interest rate pre-processing models

Brief description and eligible instruments

Analyse and aggregate options risks for:

May be used to calculate duration weighted positions for:

The output and how it is used in the PRR calculation

Depending on the type of model and the requirements in the CAD 1 model waiver granted, the outputs from an options risk aggregation model are used as an input to the market risk capital requirement calculation.

Depending on the type of model and the requirements in the CAD 1 model waiver granted, the individual sensitivity figures produced by this type of CAD 1 model are either input into the calculation of interest rate PRR under the interest rate duration method (see BIPRU 7.2.63R) or are converted into notional position and input into the calculation of interest rate PRR under the interest rate maturity method (see BIPRU 7.2.59R).

BIPRU 7.9.9GRP
Details of the general waiver process are set out in SUP 8 (Waiver and modification of rules). Further details of the waiver process applicable to certain waivers relating to BIPRU (including CAD 1 model waivers) can be found in BIPRU 1.3 (Applications for advanced approaches). Because of the complexity of a CAD 1 model waiver, it is recommended that, as set out in SUP 8.3.4 G and BIPRU 1.3.21 G, a firm contact its usual contact at the FSA to discuss its proposed application.
BIPRU 7.9.11GRP
The model review process may be conducted through a series of visits covering various aspects of the firm's control and IT environment. Before these visits the FSA may ask the firm to provide some information relating to its waiver request accompanied by some specified background material. The model review visits are organised on a timetable that allows a firm being visited sufficient time to arrange the visit and provide the appropriate pre-visit information.
BIPRU 7.9.14GRP
A review by a skilled person may be used before a CAD 1 model waiver is granted to supplement the waiver process or after the waiver has been granted to review the CAD 1 model.
BIPRU 7.9.16GRP
Where a firm operates any part of its CAD 1 model outside the United Kingdom, the FSA may take into account the results of any review of that model carried out by any overseas regulator concerned. The FSA may wish to receive information directly from that regulator.
BIPRU 7.9.17GRP
No changes should be made to a CAD 1 model unless the change is not material. Material changes to a CAD 1 model will require a renewed waiver to be issued. Materiality is measured from the time that the waiver is granted or, if the waiver has been varied in accordance with section 148 of the Act, any later time that may be specified in the waiver for these purposes. If a firm is considering making material changes to its CAD 1 model, then it should notify the FSA at once. If a
BIPRU 7.9.18GRP
If the CAD 1 model ceases to meet the requirements of the waiver, the firm should notify the FSA at once. The FSA may then revoke the waiver unless it is varied in accordance with section 148 of the Act. If the CAD 1 model waiver contains conditions it is a condition of using the CAD 1 model approach that the firm should continue to comply with those conditions.
BIPRU 7.9.20GRP
A firm should be able to demonstrate that the risk management standards set out in BIPRU 7.9 are satisfied by each legal entity with respect to which the CAD 1 model approach is being used (even though they are expressed to refer only to a firm). This is particularly important for subsidiary undertakings in groups subject to matrix management where the business lines cut across legal entity boundaries.
BIPRU 7.9.21GRP
(1) A firm should have a conceptually sound risk management system which is implemented with integrity and should meet the minimum standards set out in this paragraph.(2) A firm should have a risk control unit that is independent of business trading units and reports directly to senior management. The unit should be responsible for designing and implementing the firm's risk management system. It should produce and analyse daily reports on the risks run by the business and on the
BIPRU 7.9.22GRP
In assessing whether the risk management and control framework is implemented with integrity, the FSA will consider the IT systems used to run the CAD 1 model and associated calculations. The assessment will include, where appropriate:(1) feeder systems; risk aggregation systems; the integrity of the data (i.e. whether it is complete, coherent and correct); reconciliations and checks on completeness of capture; and(2) system development, change control and documentation; security
BIPRU 7.9.23GRP
A firm should take appropriate steps to ensure that it has adequate controls relating to:(1) the derivation of the PRR from the CAD 1 model output;(2) CAD 1 model development, including independent validation;(3) reserving;(4) valuation (see GENPRU 1.3 (Valuation)), including independent validation; and(5) the adequacy of the IT infrastructure.
BIPRU 7.9.24GRP
A firm should take appropriate steps to ensure that its CAD 1 model captures and produces an accurate measure of the risks inherent in the portfolio covered by the CAD 1 model. These risks may include, but are not limited to, gamma, vega and rho.
BIPRU 7.9.26GRP
The FSA does not specify the methodology that a firm should employ in order to produce the appropriate outputs from its options risk aggregation CAD 1 model. However, BIPRU 7.9.27G - BIPRU 7.9.43G provide details of how a firm could meet the requirement to capture gamma, vega and rho risks using a scenario matrix approach. Where a firm adopts the scenario matrix approach then the standards set out in BIPRU 7.9.27G - BIPRU 7.9.43G should be followed. The firm should also take into
BIPRU 7.9.43GRP
In using the scenario matrix approach, none of the steps followed will take specific account of a firm's exposure to rho risk. Where a firm can demonstrate that for interest rate-related options the rho sensitivity is effectively included in the delta sensitivities produced, there is no separate capital requirement relating to rho. For all other options except commodity options, a firm should calculate a rho sensitivity ladder by currency using its CAD 1 model and either feed
BIPRU 7.10.2GRP
BIPRU 7.10 provides details of when the FSA expects to allow a firm to use a VaR model (value at risk model) for the purpose of calculating part or all of its PRR. It introduces the concept of a VaR model, the methodology behind it and the link to the standard market risk PRR rules. It then goes on to detail the application and review process. The bulk of BIPRU 7.10 specifies the model standards and risk management standards that firms will be required to meet in order to use
BIPRU 7.10.3GRP
The models described in BIPRU 7.10 are described as VaR models in order to distinguish them from CAD 1 models, which are dealt with in BIPRU 7.9 (Use of a CAD 1 model). A VaR model is a risk management model which uses a statistical measure to predict profit and loss movement ranges with a confidence interval. From these results PRR charges can be calculated. The standards described in BIPRU 7.10, and which will be applied by the FSA, are based on and implement Annex V of the
BIPRU 7.10.4GRP
The aim of the VaR model approach is to enable a firm with adequate risk management systems to be subject to a PRR requirement that is more closely aligned with the risks to which it is subject than the PRR requirements generated by the standard market risk PRR rules. This provides a firm with an incentive to measure market risks as accurately and comprehensively as possible. It is crucial that those responsible for managing market risk at a firm should be aware of the assumptions
BIPRU 7.10.6GRP
A firm should not use the VaR model approach to calculate PRR unless it has a VaR model permission. If a firm does not have such a permission it should use the standard market risk PRR rules. Therefore, a firm needs to apply for a VaR model permission in order to calculate its PRR using a VaR model instead of (or in combination with) the standard market risk PRR rules.
BIPRU 7.10.7GRP
A waiver or other permission allowing the use of models in the calculation of PRR will not be granted if that would be contrary to the Capital Adequacy Directive and any VaR model permission which is granted will only be granted on terms that are compatible with the Capital Adequacy Directive. Accordingly, the FSA is likely only to grant a waiver or other permission allowing the use of models in the calculation of PRR if it is a VaR model permission or a CAD 1 model waiver.
BIPRU 7.10.39RRP
In the case of general market risk and risks with respect to which the standard market risk PRR rules do not distinguish between general market risk and specific risk, a firm'sVaR model must capture a sufficient number of risk factors in relation to the level of activity of the firm and in particular the risks set out in BIPRU 7.10.40R - BIPRU 7.10.44R.
BIPRU 7.10.134GRP
By modifying GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to allow the firm to use the VaR model to calculate all or part of its PRR for certain positions, the FSA is treating it like an application rule. The modification means that the PRR calculation set out in BIPRU 7.10 supersedes the standard market risk PRR rules for products and risks coming within the scope of the VaR model permission.
BIPRU 7.10.136RRP
(1) This rule applies to a position of a type that comes within the scope of a firm'sVaR model permission.(2) If, where the standard market risk PRR rules apply, a position is subject to a PRR charge and the firm'sVaR model permission says that it covers the risks to which that PRR charge relates, the firm must, for those risks, calculate the PRR for that position under the VaR model approach rather than under the standard market risk PRR rules.(3) If, where the standard market
BIPRU 7.10.137RRP
A firm may exclude from the VaR model approach immaterial risks within the scope of its VaR model approach. If a firm does so it must instead apply the standard market risk PRR rules to those risks.
BIPRU 7.10.138RRP
(1) If a firm calculates its market risk capital requirement using a combination of the standard market risk PRR rules and either the VaR model approach or the VaR model approach with the CAD 1 model approach the PRR from each method must be added together.(2) A firm must take appropriate steps to ensure that all of the approaches are applied in a consistent manner.
BIPRU 7.10.139GRP
An example of the effect of BIPRU 7.10.138R is that where a firm normally calculates the PRR for a particular portfolio using a VaR model, a firm should not switch to the standard market risk PRR rules purely to achieve a more attractive PRR.
BIPRU 7.10.140RRP
If:(1) the standard market risk PRR rules provide for a choice of which of the PRR charges to use or specify that one type must be used in some circumstances and that another type must be used in other circumstances;(2) one of those types is disapplied under BIPRU 7.10.136R; and(3) the other type is not disapplied;the firm:(4) must use the VaR model approach if under the standard market risk PRR rules the firm must use the standard market risk PRR rules in (2); and(5) may use
BIPRU 7.10.141GRP
The treatment of a convertible is an example of a situation in which BIPRU 7.10.140R applies. The table in BIPRU 7.3.3R (Table: Instruments which result in notional positions) shows that there are circumstances in which under the standard market risk PRR rules a firm should calculate an equity PRR and that there are circumstances in which a firm may choose between calculating an equity PRR and an interest rate PRR. BIPRU 7.10.140R would be relevant if a firm'sVaR model permission
BIPRU 7.10.142RRP
The standard market risk PRR rules for the option PRR are only disapplied to the extent that the derived positions arising under BIPRU 7.6.13R (Table: Derived positions) come within the scope of the VaR model permission.
BIPRU 7.10.143RRP
If a firm'sVaR model permission covers interest rate general market risk but not interest rate specific risk, the firm must calculate the interest rate PRR so far as it relates to interest rate specific risk in accordance with the standard market risk PRR rules except that the firm must not use the basic interest rate PRR calculation in BIPRU 7.3.45R (Basic interest rate calculation for equity instruments).
BIPRU 7.10.144RRP
If a firm'sVaR model permission covers equitygeneral market risk but not equityspecific risk, the firm must calculate the equity PRR so far as it relates to equityspecific risk in accordance with the standard market risk PRR rules except that the PRR for equityspecific risk must be calculated under the standard equity method.
FEES 3.2.7RRP

Table of application, notification and vetting fees

(1) Fee payer

(2) Fee payable

Due date

(a) Any applicant for Part IV permission (including an incoming firm applying for top-up permission)

(1) Unless (2) applies, in1 respect of a particular application, the highest of the tariffs set out in FEES 3 Annex 1 part 11 which apply to that application.

(2) In respect of a particular application which is:

(i) a straightforward or moderately complex case for the purposes of FEES 3 Annex 1 part 1, and

(ii) only involves a simple change of legal status as set out in FEES 3 Annex 1 part 6,

the fee payable is 50% of the tariff that would otherwise be payable in FEES 3 Annex 1 part 11

1

On or before the application is made

(b) Any Treaty firm that wishes to exercise a Treaty right to qualify for authorisation under Schedule 4 to the Act (Treaty rights) in respect of regulated activities for which it does not have an EEA right, except for a firm providing cross border services only4

(1) Where no certificate has been issued under paragraph 3(4) of Schedule 4 to the Act the fee payable is, in respect of a particular exercise, set out in FEES 3 Annex 1, part 4

(2) Where a certificate in (i) has been issued no fee is payable

On or before the notice of exercise is given

(c) Any applicant for a certificate under article 54 of the Regulated Activities Order

2,000

On or before the application is made

(d) Applicants for an authorisation order for, or recognition of, a collective investment scheme

FEES 3 Annex 2, part 1

On or before the application is made

(f) Any person seeking an order under section 326(1) of the Act to become a designated professional body.

10,000

30 days after the order is granted

(g) Any applicant for recognition as a UK recognised body under section 287 or section 288 of the Act

FEES 3 Annex 3, part 1

On or before the date the application is made

(h) Any applicant for recognition as an overseas recognised body under section 287 or section 288 and section 292 of the Act

FEES 3 Annex 3, part 2

On or before the date the application is made

(i) An applicant for listing (under the listing rules)

FEES 3 Annex 4, part 1

On or before the date the application is made

(j) Applicant for approval as sponsor (under the listing rules)

FEES 3 Annex 4, part 2

On or before the date the application is made

(k) Issuers of tranches from debt issuance programmes and securitised derivative tranches

FEES 3 Annex 4, part 1

An upfront fee is required per tranche for draw downs in the following 12 months

(l) Under the listing rules, an issuer involved in specific events or transactions during the year where documentation is subject to a transaction vetting

FEES 3 Annex 5, part 1, unless the transaction would come within the definition of significant transaction under category (q) in this table, in which case the fee payable under that category.2

On or before the date that relevant documentation is first submitted to the FSA

(m) Under the prospectus rules, an issuer or person requesting approval or vetting of the documents arising in relation to specific events or transactions that it might be involved in during the year

FEES 3 Annex 5, part 2, unless the transaction would come within the definition of significant transaction under category (q) in this table, in which case the fee payable under that category.2

On or before the date that relevant documentation is first submitted to the FSA

(n) Applicants to be added to the list of designated investment exchanges

50,000

On or before the date the application is made

2(o) Either:5

(i) a firm applying to the FSA for permission to use one of the advanced prudential calculation approaches listed in FEES 3 Annex 6 R (or guidance on its availability), including any future proposed amendments to those approaches or (in the case of any application being made for such permission to the FSA as EEA consolidated supervisor under the ) any firm making such an application ;5 or

(ii) in the case of an application to 5a Home State regulator other than the FSA5for the use of the Internal Ratings Based approach and the Home State regulator requesting the FSA's assistance in accordance with the Capital Requirements Regulations 2006 , any firm to which the FSA would have to apply any decision to permit the use of that approach.5

112555

(1) Unless5 (2) applies, FEES 3 Annex 6.5

(2) (a) Unless5 (b) applies a1firm submitting a second application for the permission or5guidance described in column (1) within 12 months of the first application (where the fee was paid in accordance with (1)) must pay 50% of the fee applicable to it under FEES 3 Annex 6, but only in respect of that second application

(b) No fee is payable by a firm in relation to a successful application for a permission5 based on a minded to grant decision in respect of the same matter following a complete application for guidance in accordance with prescribed submission requirements.1

(c) No fee is payable where the Home State regulator has requested the assistance of the FSAas described in paragraph (o)(ii) of column 1 except in the cases specified in 5FEES 3 Annex 6.2

5251255555

Where the firm has made an application directly to the FSA, on or before the date the application is made, otherwise within 30 days after the FSA notifies the firm that its EEA parent's Home State regulator has requested the FSA's assistance.2

2

(p) A firm applying for a variation of its Part IV permission

(1) Unless (2) applies, if the proposed new1 business of the firm would1 fall within one or more activity groups specified in Part 1 of FEES 4 Annex 1 not applicable before the application1, the fee is 50% of the highest of the tariffs set out in which apply to that application.

(2) If the only change is that the1 A.12 activity group tariff applied to the firm's business before the variation and the A.13 activity group will apply after variation, no fee is payable(3) In all other cases, other than applications by credit unions, the fee payable is 250, unless the variation involves only the reduction (and no other increases) in the scope of a Part IV permission in which case no fee is payable.1

11

On or before the date the application is made

2(q) A significanttransaction, being one where:

(i) the issuer has a market capitalisation in excess of 1.5 billion and it is a new applicant for a primary listing under the listing rules, or involved in a reverse or hostile takeover or a significant restructuring; or

(ii) the issuer has a market capitalisation in excess of 5 billion and is involved in a class 1 transaction or a transaction requiring vetting of an equity prospectus or equivalent document

; or (iii) the issuer is proposing a Depositary Receipt issue intended to raise more than 5billion.

50,000

On or before the date that the relevant documentation is first submitted to the FSA.3

33

2(r) Providers of reporting or trade matching systems applying for recognition under MiFID as an Approved Reporting Mechanism.

100,0006

6

Having received its application, within 30 days after the FSA has notified the applicant that it is to commence testing of the applicants systems.6

56

5(s) In the case of an insurance business transfer scheme, a transferor.

Note - for the purpose of this paragraph an insurance business transfer scheme consists of a single transferor and a single transferee. Where however such a scheme is part of a single larger scheme, that larger scheme is treated as a single insurance business transfer scheme. If an insurance business transfer scheme includes more than one transferor in accordance with this paragraph, the transferors are liable to pay the fee under column (2) jointly.

Either (1) or (2) as set out below:

(1) In the case of an insurance business transfer scheme involving long term insurance business, 18,500; or

(2) in the case of an insurance business transfer scheme not involving long term insurance business, 10,000.

On or before any application is made to the FSA for the appointment of a person as an independent expert.

6(t) A firm, a third party acting on a firm's behalf, an operator of a regulated market or an operator of an MTF applying to the FSA to report transaction reports directly to the FSA other than through the FSA's Transaction Reporting System (see FEES 4.2.11 R and FEES 4 Annex 3 for the fees payable for firms using the FSA's Transaction Reporting System).

100,000

Having received its application, within 30 days after the FSA has notified the applicant that it is to commence testing of the applicants systems.

BIPRU 1.3.2GRP
(1) A firm may apply for an Article 129 permission or a waiver in respect of:(a) the IRB approach;(b) the advanced measurement approach;(c) the CCR internal model method; and(d) the VaR model approach.(2) A firm should apply for a waiver if it wants to:(a) apply the CAD 1 model approach;(b) apply the master netting agreement internal models approach;(c) disapply consolidated supervision under BIPRU 8 for its UK consolidation group or non-EEAsub-group;(d) apply the treatment in
BIPRU 13.5.9RRP
A firm must apply the CCR mark to market method to transactions with a non-linear risk profile or for payment legs and transactions with debt instruments as underlying if:(1) the firm does not have a CAD 1 model permission or a VaR model permission; or(2) where the firm does have a CAD 1 model permission or a VaR model permission but cannot determine the delta or the modified duration, respectively, with its CAD 1 model permission or VaR model permission.[Note: BCD Annex III Part